Jescar Power Lock Plus Polymer Sealant offers the best longevity of any polymer sealant I have tested. The cross-linking polymers offer maximum longevity and a surprising depth of shine for a polymer sealant. Apply a thin even coat by hand with a Blu-Velvet Microfiber Applicator or by machine with a soft, foam pad. Allow it to haze and remove with a Blu-Velvet Microfiber Buffing & Polishing Cloth. If you apply a thin, even coat, Power Lock will be very easy to apply and remove. The cross-linked polymers form a very slick surface that will help repel grime, dust, and even brake dust. If you want to use a polymer sealant on your wheels, this is the best I have found.
- Polymer paint sealant
- Protects surface from airborne contaminants
- Guarantees a deep, wet-look finish
- Up to 6 months durability
- Can be applied by hand, or by machine.
By hand: Use a soft foam applicator to apply a thin layer of sealant. Allow to dry to a haze and remove residue after 30 minutes using a clean, high quality microfiber towel.
By machine: Use a small amount (2-3 small drops per working section) of Power Lock Plus on a finishing pad to get an even coverage. No pressure is needed, and set the D/A polisher at speed 2 or 3. Apply to the entire vehicle, then remove after about 30 minutes using a high quality microfiber towel.
If desired, a second layer of Power Lock Plus can be applied for even greater protection and durability. Wait a minimum of 3 hours after the first application before adding the second layer.
Use Jescar Paint Refresher as a gloss enhancer and cleaner in between car washes.
Sizes: 16 oz, 32 oz, & 128 oz
Reviews
There are no reviews yet.