McKee’s 37 Tire & Rubber Rejuvenator is a heavy-duty cleaner and degreaser that safely removes unwanted browning, silicone-based tire dressings, dirt, and grime from your vehicle’s tires, leaving them squeaky clean and ready for application of your favorite tire shine.
McKee’s 37 Tire & Rubber Rejuvenator is the first component of a two-part tire protection system. This intense cleaner removes all traces of previously applied tire shine sprays, gels, protectants, and browning, leaving your tires 100% clean and ready to be coated with McKee’s 37 Ceramic Tire Coating, or your favorite tire shine of your choice.
Does your vehicle have whitewall tires? Tire & Rubber Rejuvenator will make them as white as they day they were new!
STOP CLEANING YOUR TIRES WITH CAUSTIC ALL PURPOSE CLEANERS! These high-octane, inexpensive cleaners actually do more harm than good. The issue with most all purpose cleaners is that they’re formulated to meet a certain price point, and in order to achieve that inexpensive price point, caustic ingredients are often found in these products. These caustic detergents are harmful to you AND your tires!
You see, tires contain antiozonants, rubber conditioners, and UV absorbers that help keep the tire flexible. The wrong cleaner will actually cause the antiozonants, rubber conditioners, and UV absorbers to leach out of the tire, resulting in browning, discoloration and cracking of the tire. McKee’s 37 Tire & Rubber Rejuvenator is non-caustic, non-acidic, and it will not harm your tires!
It’s common knowledge among professional detailers and car care enthusiasts that a tire gel or tire shine spray will last considerably longer if the tire is properly cleaned first. By completely removing previously applied dressings and protectants, you have a clean base for the new tire shine to adhere to. This greatly extends the durability and increases the look of your tire shine of choice.
McKee’s 37 Tire & Rubber Rejuvenator is safe for use on all tires. We recommend spraying the wheel with water first, just to ensure any unwanted overspray is easy to remove.
Directions:
- Ensure surface is cool to the touch.
- Wet wheels, not tires, prior to application.
- Spray a liberal amount of McKee’s 37 Tire & Rubber Rejuvenator directly onto DRY tire and allow to dwell for 1-2 minutes.
- Scrub using a stiff-bristled brush; wet bristles often. We recommend using the Low Profile Tire Brush because it’s stiff and easy to hold on to.
- Thoroughly scrub the tire until all browning is removed.
- Tires are completely cleaned when white foam is produced as you scrub.
- Thoroughly rinse wheels and tires, ensuring all traces of the cleaner are removed.
- Allow tires to dry and then apply McKee’s 37 Ceramic Tire Coating or your favorite tire shine.
22 oz.
Reviews
There are no reviews yet.